Показать сообщение отдельно
Старый 10.05.2013, 22:10 Вверх   #6
Модератор
 
Аватар для elvis75
elvis75 вне форума
Доп. информация
По умолчанию

Цитата Сообщение от Злой Посмотреть сообщение
а у меня в два раза больше за пол года
А часов сколько наработал? Мой 2007 часов, то есть парковались головки каждые 3 минуты работы.
Хотя возможно твой ноут в основном от батареи работает...

Нажми для просмотра

Код:
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-41-generic-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     HITACHI HTS545032B9A300
Serial Number:    101104PBN3044TG1NS7S
LU WWN Device Id: 5 000cca 66fc0c243
Firmware Version: PB3ZC61H
User Capacity:    320,072,933,376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Fri May 10 22:06:41 2013 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  645) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 106) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   142   142   033    Pre-fail  Always       -       2
  4 Start_Stop_Count        0x0012   099   099   000    Old_age   Always       -       2353
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   096   096   000    Old_age   Always       -       2007
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1769
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       1825505302
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       37711
194 Temperature_Celsius     0x0002   177   177   000    Old_age   Always       -       31 (Min/Max 8/40)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1414         -
# 2  Short offline       Completed without error       00%      1249         -
# 3  Short offline       Completed without error       00%      1223         -
# 4  Short offline       Completed without error       00%      1145         -
# 5  Short offline       Completed without error       00%      1077         -
# 6  Short offline       Aborted by host               10%      1063         -
# 7  Short offline       Completed without error       00%      1041         -
# 8  Short offline       Completed without error       00%       902         -
# 9  Short offline       Completed without error       00%       819         -
#10  Short offline       Completed without error       00%       737         -
#11  Short offline       Completed without error       00%       652         -
#12  Short offline       Completed without error       00%       516         -
#13  Short offline       Completed without error       00%       471         -
#14  Short offline       Completed without error       00%       411         -
#15  Short offline       Completed without error       00%       220         -
#16  Short offline       Completed without error       00%       150         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Последний раз редактировалось elvis75; 10.05.2013 в 22:47..
  Ответить с цитированием
 
Время генерации страницы 0.04535 секунды с 10 запросами